Precision Metal Stamping Parts Polished Stainless Steel Motor Support
Stainless steel support stamping parts are stamped a plate socket and bended a clip in strip , bended upper section to fix or secure support stamping part on object and supporting socket with flat panel is used to support something of motor .
Material
Support stamping parts are made of high tensile strength stainless steel 18-8 that with good performance or properties .
|
Tensile strength σb (MPa)
|
535
|
|
Yield Strength σs (MPa)
|
210
|
|
Elongation δ5 (%)
|
50
|
|
Reduction of area ψ (%)
|
65
|
Mechanical property of support stamping parts
|
Fusing point(℃)
|
1398 to 1454
|
|
Specific heat capacity(0~100℃,KJ·kg-1K-1)
|
0.5
|
|
Heat conductivity(W·m-1·K-1)
|
(100℃)16.3 ,(500℃)21.5
|
Thermal performance of support stamping parts
|
Resistivity(20℃,10-6Ω·m)
|
0.73
|
Electrical performance of support stamping parts
Dimensions
Length : 25 mm
Width : 25 mm
Height : 15 mm
Thickness : 0.8 mm
Chamfer : 0.5 x 45°
Note : we accept customized sizes from 0.5 mm to 5 m for different designs .
Tolerance
+/-0.1 mm for normal sizes , and refer to following tolerances standard for unspecified sizes .
| Normal Size |
Thickness |
| FM |
TO |
FM |
TO |
m |
| 0.5 |
3 |
— |
1 |
±0.10 |
| 1 |
3 |
±0.20 |
| 3 |
6 |
— |
1 |
±0.15 |
| 1 |
4 |
±0.30 |
| 4 |
— |
±0.40 |
| 6 |
30 |
— |
1 |
±0.20 |
| 1 |
4 |
±0.40 |
| 4 |
— |
±0.60 |
| 30 |
120 |
— |
1 |
±0.30 |
| 1 |
4 |
±0.55 |
| 4 |
— |
±0.80 |
| 120 |
400 |
— |
1 |
±0.35 |
| 1 |
4 |
±0.70 |
| 4 |
— |
±1.05 |
| 400 |
1000 |
— |
1 |
±0.50 |
| 1 |
4 |
±1.00 |
| 4 |
— |
±1.45 |
| 1000 |
2000 |
— |
1 |
±0.65 |
| 1 |
4 |
±1.30 |
| 4 |
— |
±2.00 |
| 2000 |
4000 |
— |
1 |
±1.00 |
| 1 |
4 |
±2.00 |
| 4 |
— |
±2.60 |
Characteristics
Stainless steel support stamping parts for motor have high tensile strength and good performance to meet continuous high-load working .
◆ High tensile strength
Tensile strength is up to 535 σb (MPa) and more higher after heat treatment .
◆ Perfect elongation
50 δ5 (%) to ensure support stamping parts have enough elongation under heavy load and pressure . .
◆ Hard material
Support stamping parts are made of stainless steel 18-8 that hardness is HRC 72 or so .
◆ Resistance to corrosion
Stainless steel 18-8 with good performance on anti-corrosion by itself . normally , not to be rusted in 5 years inside conditions .
◆ Non-magnet
Its nearly no magnet for stainless steel 18-8 support stamping parts .
Finish
Polishing for support stamping parts
Product Tags:
|
|
Precision Metal Stamping Parts Polished Stainless Steel Motor Support Images
|
